Professional

Leading

Service Hotline
+86 136-9170-9838
[→] Enquire Now
Close [x]
Water-based cleaning agent Water-based cleaning agent
Water-based cleaning agent - W365
W365

For reference only, subject to actual

W365 Introduction

W365 is an environmentally friendly water-based cleaning agent developed for online cleaning of chain claws. It is suitable for continuous online brushing of chain claws which are not disassembled during operation of wave furnaces, and can also be used for equipment maintenance after shutdown. It can effectively remove various residues such as flux, rosin, and oil stains that have been repeatedly baked at high temperatures on the chain claws. This product has the advantages of strong cleaning power, good material compatibility, halogen free, low odor, and difficult to produce foam during cleaning.

W365 Product Features

➤ Suitable for continuous online brushing of chain claws, and can also be used for equipment maintenance after shutdown.
➤ Halogen free, low odor safe to use, not easy to produce foam in the cleaning process, which can meet the requirements of circulating cleaning process.
➤ The service life is 2-5 times that of traditional surfactant cleaning agents, greatly reducing the cost of use.
➤ The formula does not contain solid substances and there is no solid residue after cleaning.
➤ When the cleaned chain claws enter the high-temperature tin furnace after passing through the preheating zone of the conventional process, there will be no tin explosion phenomenon.
➤ Safe compatibility with sensitive materials such as brass, glass, ceramics, rubber, plastic, steel, composite materials, cast iron, aluminum alloys, etc.

W365 Applicable process

W365 chain claw water-based cleaning agent is suitable for continuous brushing of online chain claws, and can also be used for equipment maintenance after shutdown.

W365 Application

W365 chain claw water-based cleaning agent can effectively remove various soldering fluxes, rosin, oil stains and other residues that have been repeatedly baked at high temperatures on the chain claw.


The continuous online brushing process refers to the process of cleaning the chain claws by the built-in cleaning device of the wave furnace during the continuous wave soldering process without disassembling the chain claws.


The application effects are listed in the following list.

W365

Application of Unibright products

💧If you cannot find the information you need, please contact customer service +86 136-9170-9838
[ico] 💬
Service hotline
Service hotline:
Enquire
Online consultation:
Enquire
Contact Us
[↑]
Application
[x]
*
*
Marked with * is mandatory