Professional

Leading

Service Hotline
+86 136-9170-9838
[→] Enquire Now
Close [x]
Water-based cleaning agent Water-based cleaning agent
Water-based cleaning agent - NY600
NY600

For reference only, subject to actual

NY600 Introduction

NY600 is an environmentally friendly water-based cleaning agent suitable for cleaning printed silver paste stencil. This product, combined with ultrasonic or spray cleaning processes, can effectively remove small silver particles on the stencil, especially in the stencil hole. After cleaning, the residual amount of silver powder on the stencil is low, meeting the usage requirements. Compared to traditional solvent based cleaning agents, water-based cleaning agent NY600 has the advantages of low odor, low harm to human health and the environment, and safe and non-flammable use.

NY600 Product Features

➤ Suitable for cleaning various printed silver paste screen plates and silver paste misprint plates before solidification in electronic processing processes.
➤ Water based cleaning agent, no flash point, safe to use, without the need for additional explosion-proof measures.
➤ The material is environmentally friendly and does not contain RoHS restricted substances or halogens.
➤ The formula is mild, the pH is neutral, and the material compatibility is good.

NY600 Applicable process

Suitable for ultrasonic and high-pressure spray cleaning processes
{pboot:if('

NY600 water-based cleaning agent is an environmentally friendly neutral water-based cleaning agent used for various printing silver paste screen cleaning processes, suitable for ultrasonic or high-pressure spray cleaning.

It is recommended to clean the screen and misprinted boards that need to be cleaned in a timely manner. If the screen/misprinted boards were left for too long, the slurry will solidify to varying degrees, which will affect the cleaning effect.

The specific application scope is listed in the table below.

NY600

'!='')}

NY600 Application

NY600 water-based cleaning agent is an environmentally friendly neutral water-based cleaning agent used for various printing silver paste screen cleaning processes, suitable for ultrasonic or high-pressure spray cleaning.

It is recommended to clean the screen and misprinted boards that need to be cleaned in a timely manner. If the screen/misprinted boards were left for too long, the slurry will solidify to varying degrees, which will affect the cleaning effect.

The specific application scope is listed in the table below.

NY600

{else} {/pboot:if}

Application of Unibright products

💧If you cannot find the information you need, please contact customer service +86 136-9170-9838
[ico] 💬
Service hotline
Service hotline:
Enquire
Online consultation:
Enquire
Contact Us
[↑]
Application
[x]
*
*
Marked with * is mandatory